Streatham Common: 0208 677 0459 & info@premiersheds.co.uk - - - Streatham Hill: 0208 835 9325 & sales@premiersheds.co.uk

Premier Sheds & Fencing

>

Premier Sheds & Fencing's Streatham Hill Display Site - SW16 2JJ - is open
Monday - Friday, 08:00 - 17:00 & Saturday 09:00 - 13:00, excluding Bank holidays.

Its Trade Depot, adjacent to Streatham Common Station - SW16 5NR - is open
Monday - Friday, 08:00 - 17:05 & Saturday 08:00 - 13:00, excluding Bank holidays.

While both branches are fully equipped for Trade and Retail, a wider range of Garden Sheds
& Buildings can be viewed at Streatham Hill
- junction of Leigham Vale & Knollys Road.

Click here for delivery options

Premier Sheds & Fencing can provide a local installation service on any of its products. Being the
renowned bespoke specialist, its custom-built service - constructed to any size or/& specification - is available on items marked # - please contact us for details.

Barbican Defender Security Commercial
Swing Entrance Gates

Barbican gates are constructed of completely pre-welded panels with internal connectors to posts leaving no exposed nuts or bolts for people to undo or tamper with and therefore making the gates as vandalproof as possible. In addition the gates are available with a maximum gap between pales of 100mm, as recommended by Local Authorities for sensitive locations such as schools and public areas. With the top of the pales bent over at an angle, Defender makes climbing over either way even more difficult. The range is available in two sytles - Barbican Defender with 210mm bent over pales and Barbican Defender Plus with 400mm bent over pales.

Barbican Defender Security Commercial Swing Entrance Gates
 


Available with pales at 150mm centres or 129mm centres to give a maximum 100mm gap; required for schools and play areas. Double leaf gates 3.0m high as standard with 1.0m, 2.0m, 2.5m, 3.0m, 3.5m, 4.0m, 4.5m, 5.0m, 6.0m, 7.0m, 8.0m, 9.0m & 10.0m openings. Horizontal rails for all gates are 60 x 40mm. Hanging and shutting stiles are of rectangular hollow section 60mm x 60mm; wall thickness 2mm. All gates have either two or three horizontal rails according to height and width. Gate leaves over 3.5m have specially designed bracing across the bottom of the gate which adds strength without compromising security. The hinges allow the gate to swing through an angle of 180. They are integral to the construction of the gate and are fully adjustable. All screws and bolts are tamperproof when the gates are closed. Gate Posts are made from square hollow sections, in three sizes 100mm, 120mm and 150mm depending on the height and width of gate. They come complete with hinges, catch fixings and welded steel caps. The post is designed to go into concrete approximately 800mm. Alternative posts are available with base plates for bolting onto concrete bases. Pales are 25mm x 25mm and pass through the rails with standard spacing at 129mm or 150mm centres and they are then welded. The palings protrude 175mm above the top rail and 100mm below the bottom rail. With this arrangement, it is practically impossible to remove individual palings. Single gates are supplied with a key lock as standard and a stop clamp. Double gates are supplied with a centre gate stop, provision for a heavy duty padlock and two hold open latches.

Made entirely from hot-dip galvanized steel with an additional durable coating in green, black, white, blue or grey (Other colours on request) Barbican keeps its good looks without rusting or needing repainting.

Premier Sheds & Fencing

Streatham Common Depot - Station Approach - Streatham Common - LONDON - SW16 5NR - T: 020 8677 0459 - E: info@premiersheds.co.uk

Streatham Hill Showroom - Leigham Vale - Streatham Hill - LONDON - SW16 2JJ - T: 020 8835 9325 - E: sales@premiersheds.co.uk


SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment